Bone Collector and Guide Kit (3 in 1 Kit)

Designed to accomplish 3 tasks in a single kit

1. Implant positioning
2. Osteotomies
3. Bone harvesting and decortication

Can be used with the majority of implant systems
Allows clinicians to confidently place dental implants without the worry or complication of implant guide

Implant positioning:

• Provides three sizes of guide pins
• Guide pins preserve the restorative space of the final crown by accurately spacing implant osteotomies
• Select the appropriate guide pin which will be determined by the estimated size of the final crown
• Find the corresponding stopper and engage it with the guide drill Stoppers come in a variety of lengths to prevent over/under drilling
• After the pilot hole is created, slide the stopper pin in the osteotomy to preserve the restorative space
• Repeat for multiple implant sites

Osteotomies:

• Created with a variety of Bone Collecting Drills Drills come in the following diameters: 2.8mm 3.3mm 3.8mm 4.3mm 4.8mm
• For hard bone: Chose the diameter which is closest to the diameter of the implant, but not larger
• For soft bone: Chose the diameter which is the second smaller size
• Stoppers slide over the barrel of the drill to prevent over/under drilling as well as accurately distancing the osteotomy from adjacent teeth

Bone harvesting and decortication:

• During the creation of the osteotomy, bone will be collected within the hollow chamber of the drill
• This bone is easily removed and can be used to graft around the implant
• This Kit also includes a 1.4mm Decortication Drill which a built in stopper
• The Decortication drill is used to increase vascularity, and improve the likelihood of surgical success

The Kit Includes:

• (5) Bone Collecting Drills (2.8, 3.3, 3.8, 4.3, 4.8mm)
• (5) 7.50mm Diameter Stoppers with Depths of (6.0, 8.0, 10.0, 11.5, 13.0mm)
• (5) 9.00mm Diameter Stoppers with Depths of (6.0, 8.0, 10.0, 11.5, 13.0mm)
• (5) 10.50mm Diameter Stoppers with Depths of (6.0, 8.0, 10.0, 11.5, 13.0mm)
• (2) Guide Pins: Height 2.8mm, Diameter 7.50mm
• (2) Guide Pins: Height 2.8mm, Diameter 9.00mm
• (2) Guide Pins: Height 2.8mm, Diameter 10.5mm
• (1) 2.00mm Triangular Pilot Drill
• (1) 1.40mm x 3.50mm Decortication Drill
• (1) Titanium Bone Well
• (1) Implant Gauge
• (1) Bone Carrier